New ArcMaster Software

Free Downloads and Free shipping if you request a hard copy.

ARCMASTER version 1.0 software for Windows operated PCs has been developed as an easy to use and comprehensive tool for calculating arc incident energy and arc flash boundary. This software simplifies determining incident energy at working distance, arc flash, limited and restricted approach boundaries in single phase and three phase AC power systems when work is to be performed on or near the energized equipment. The program performs the analysis by taking into account equipment class, fault type, system voltage, available short circuit fault current and X/R ratio, conductor gap, working distance, protection device type and rating, or a preset arc duration value, and determines incident energy released by the arc flash, arc flash and shock protection boundaries and site-specific level of personal protective equipment (PPE). ARCMASTER V1.0 is applicable for systems with voltages in the range of 50 to 30,000V AC, short circuit fault currents from 0.2 to 50kA, the fault X/R ratios from 0 to 50, conductor gaps from 1 mm. up to the lesser of 300 mm. and the maximum value where the arc can likely be sustained under the specified system voltage, available short circuit fault current and power factor expressed in terms of the fault X/R ratio.

Download ARCMASTER V1.0 Demo Free (EXE file)

Features and Benefits:

  • Calculator-style interface makes complex calculations easy to understand;
  • Provide a safer working environment by specifying the proper level of personal protective equipment. Wearing inadequate clothing is dangerous for obvious reasons, but wearing too much clothing is dangerous due to limited mobility and visibility;
  • Design safer power systems while insuring compliance with NEC 110.16, OSHA, NFPA 70E and CSA Z462 standards and regulations;
  • Avoid potential fines, lost productivity, and increased insurance and litigation costs;
  • Evaluate threshold incident energy for a second degree burn;
  • Save time by generating arc flash warning labels in electronic high resolution JPG, BMP, TIF, GIF and PDF formats;
  • Create, print, save warning labels;
  • Save equipment data, calculation results for future reference or printing;
  • Perform analysis using metric, imperial units, or a mix of both

About ARCMASTER V1.0

ARCMASTER V1.0 takes equipment class, fault type, system voltage, available short circuit fault current and X/R ratio, conductor gap, working distance, protection device type and rating, or a preset arc duration value, and determines incident energy, arc flash and shock protection boundaries. Arcing current can be expressed as a function of the length of the gap and arcing voltage. Arcing voltage can be derived as a function of arcing current, system voltage, available fault current and the fault X/R ratio. ARCMASTER V1.0 calculates arcing current using the iterative method by cycling through the equations for arcing current and arcing voltage until the answers converge. Next, the program will determine the arc duration based on protective device time-current characteristics and circuit time-constant. Lastly, the program will calculate incident energy at working distance, arc flash and shock protection boundaries. ARCMASTER V1.0 comes complete with a built-in library of selected protection devices and the capability to extend the library. The program will determine arc duration based on predicted arcing current value and selected protection device type and rating.

System Requirements

ARCMASTER V1.0 was written in C# programming language, best viewed as a descendant of both C++ and Java languages. The language was developed by Microsoft within its .NET initiative and later approved as a standard by ECMA (ECMA-334) and ISO (ISO/IEC 23270:2006). SCA V1.0 requires Microsoft .NET Framework Version 3.5 or higher to run. If you experience problems running ARCMASTER V1.0 once you install it on your PC, check please if you have .NET Framework Version 3.5 or higher installed on your PC system. To see which versions are installed, view the %WINDIR%\Microsoft.NET\Framework directory. (You should also view the Framework 64 directory on a 64-bit computer, which can have 32 or 64-bit versions installed.) Each version of the .NET Framework has a directory, and the first two digits of the directory name identify the .NET Framework version; for example: v1.1.4322 for the .NET Framework 1.1, v3.5 for the .NET Framework 3.5, and so on. If there is no Microsoft .NET framework installed on your system, or the installed .NET framework version is less than 3.5, please download .NET Framework Version 3.5 link to update your system. Should you encounter any problem installing or running ARCMASTER V1.0, contact us and we will assist you in identifying and resolving the problem.

ArcMaster Software

Free Shipping

This product qualifies for free air shipping.

  • Views: 14173
  • Product Code: ARCMASTERV1
  • Availability: In Stock
  • USD $290.00
  • Ex Tax: USD $290.00

Available Options

Free Downloads and Free shipping if you request a hard copy. Download SCA V1.0 User Guide Sh..
USD $180.00
Ex Tax: USD $180.00

DC Arc Flash Analysis Software New
Free Downloads and Free shipping if you request a hard copy. DC-Arc-Flash-Analytic version ..
USD $250.00
Ex Tax: USD $250.00

Arc Flash Analysis Software New
Arc Flash Analytic version  6.0 (AFA v6.0) software program has been developed based on IE..
USD $360.00
Ex Tax: USD $360.00